Arduino Nano ESP32 - Hardware Preparation
Starter Kit
1 | × | Arduino Nano ESP32 | |
1 | × | USB Cable Type-C | |
1 | × | DIYables Sensor Kit 30 types, 69 units | |
1 | × | (Recommended) Screw Terminal Expansion Board for Arduino Nano |
Disclosure: Some of the links provided in this section are Amazon affiliate links. We may receive a commission for any purchases made through these links at no additional cost to you. We appreciate your support.
Or you can buy the separate components as below list.
Basic Requirement
1 | × | Arduino Nano ESP32 | |
1 | × | USB Cable Type-C | |
1 | × | Breadboard | |
1 | × | Jumper Wires | |
1 | × | (Optional) DC Power Jack | |
1 | × | (Recommended) Screw Terminal Expansion Board for Arduino Nano |
Sensors/Actuators
Buy Note: Many DS18B20 sensors available in the market are unreliable. We strongly recommend buying the sensor from the DIYables brand using the link provided above. We tested it, and it worked reliably.