SENSORS/ACTUATORS

Arduino Nano 33 IoT - Hardware Preparation

Starter Kit

1	×	Arduino Nano 33 IoT
1	×	Micro USB Cable
1	×	DIYables Sensor Kit 30 types, 69 units
1	×	Recommended: Screw Terminal Expansion Board for Arduino Nano
1	×	Recommended: Breakout Expansion Board for Arduino Nano
1	×	Recommended: Power Splitter for Arduino Nano

Disclosure: Some of the links provided in this section are Amazon affiliate links. We may receive a commission for any purchases made through these links at no additional cost to you.
Additionally, some of these links are for products from our own brand, DIYables .

Or you can buy the parts separately from the list below.

Basic Requirement

1	×	Arduino Nano 33 IoT
1	×	Micro USB Cable
1	×	Breadboard
1	×	Jumper Wires
1	×	Optionally, DC Power Jack

Sensors/Actuators

1	×	LED Kit with resistor
1	×	LED (red)
1	×	Breadboard-mount Button with Cap
1	×	Breadboard-mount Button Kit
1	×	Panel-mount Push Button
1	×	Push Button Module
1	×	Ultrasonic Sensor
1	×	HC-SR501 Motion Sensor
1	×	Keypad 3x4 and 4x4 Kit
1	×	Alternatively, Keypad 3x4
1	×	Alternatively, Keypad 4x4
1	×	Light Sensor
1	×	DS18B20 Temperature Sensor (WITH Adapter)
1	×	DS18B20 Temperature Sensor (WITHOUT Adapter)
1	×	LCD
1	×	3-24V Active Piezo Buzzer
1	×	Active Piezo Buzzer Module
1	×	Passive Piezo Buzzer Module
1	×	Potentiometer
1	×	Alternatively, Potentiometer Kit
1	×	Alternatively, Potentiometer Module with Knob
1	×	Relay
1	×	Electromagnetic Lock
1	×	Door Sensor
1	×	Arduino Nano 33 IoT Motor Shield R3
1	×	Stepper Motor
1	×	Servo Motor
1	×	Touch Sensor

Buy Note: Many DS18B20 sensors available in the market are unreliable. We strongly recommend buying the sensor from the DIYables brand using the link provided above. We tested it, and it worked reliably.

Learn More

※ OUR MESSAGES

As freelancers, We are AVAILABLE for HIRE. See how to outsource your project to us
Please feel free to share the link of this tutorial. However, Please do not use our content on any other websites. We invested a lot of effort and time to create the content, please respect our work!