ESP8266 - Hardware Preparation

Starter Kit

1	×	ESP8266 NodeMCU
1	×	USB Cable Type-C
1	×	DIYables Sensor Kit 30 types, 69 units
1	×	(Recommended) Screw Terminal Expansion Board for ESP8266
1	×	(Recommended) Power Splitter For ESP8266 Type-C

Disclosure: Some of the links provided in this section are Amazon affiliate links. We may receive a commission for any purchases made through these links at no additional cost to you.
Additionally, some of these links are for products from our own brand, DIYables .

Or you can buy the separate components as below list.

Basic Requirement

1	×	ESP8266 NodeMCU
1	×	USB Cable Type-C
1	×	Breadboard
1	×	Jumper Wires
1	×	(Recommended) Screw Terminal Expansion Board for ESP8266
1	×	(Recommended) Power Splitter For ESP8266 Type-C

Optional Sensors/Actuators

1	×	Breadboard-mount Button with Cap
1	×	Breadboard-mount Button Kit
1	×	Panel-mount Push Button
1	×	LED Kit with resistor
1	×	LED (red)
1	×	Ultrasonic Sensor
1	×	HC-SR501 Motion Sensor
1	×	Keypad 3x4
1	×	Keypad 3x4 and 4x4 Kit
1	×	LCD
1	×	3-24V Active Piezo Buzzer
1	×	Active Piezo Buzzer Module
1	×	Passive Piezo Buzzer Module
1	×	Potentiometer
1	×	(Alternative) Potentiometer Kit
1	×	(Alternative) Potentiometer Module with Knob
1	×	Relay
1	×	Servo Motor
1	×	Touch Sensor
1	×	Light Sensor
1	×	DS18B20 Temperature Sensor (WITH Adapter)
1	×	DS18B20 Temperature Sensor (WITHOUT Adapter)
1	×	Electromagnetic Lock
1	×	Door Sensor
1	×	ESP8266 Motor Shield R3
1	×	Stepper Motor

Buy Note: Many DS18B20 sensors available in the market are unreliable. We strongly recommend buying the sensor from the DIYables brand using the link provided above. We tested it, and it worked reliably.

Optional Tools

Learn More

※ OUR MESSAGES

As freelancers, We are AVAILABLE for HIRE. See how to outsource your project to us
Please feel free to share the link of this tutorial. However, Please do not use our content on any other websites. We invested a lot of effort and time to create the content, please respect our work!